3.7 CIVIL LAW
In a civil trial the claims of wrong doing are made by the plaintiff, and are made against the defendant(s).
Civil court decisions are based on an onus of proof, and a balance of probabilities.
The civil court structure for Canada is pictured below,
The civil court structure for Ontario is pictured below,
The basic sequence of events for civil cases is shown in the chart below,
3.7.1 CONTRACTS
each contract must contain certain elements,
A contract goes through a number of phases. As a matter of habit, I will illustrate general possibilities with a flowchart. This chart is by no means complete, but can give a simple picture of the life of a contract.
Assignment of rights - unless limited in a contract, other parties can be assigned benefits. For example the use of a "collection agency" is a common method of dealing with bad debts using a third party.
an offer may expire if not accepted in a reasonable amount of time. Expiry dates for offers are often included.
simple offers can be revoked at any time (before acceptance), but in some cases we might want "irrevocable offers". This involves submitting the offers under seal, or in other word giving contract consideration.
The "option contract" is another type of irrevocable contract. Something of value is exchanged to in effect make the "option contract" a full contract that can lead to another contract. This type of contract could be used in mining to allow some investigation of a mine before buying mining rights.
Care should be taken to state which jurisdiction the contract is in. If this is not stated in the contract it will be determined to be where the offer was accepted. [The Queen et. al. v. Commercial Credit Corp. Ltd.]
mutual intent - a contract should outline what both parties agree on in a contract.
Letters of Intent - a common device to start business decisions, often a prelude to entering into contracts. These "agreements to agree" are not contracts, and are not legally enforceable. [Bahama Consult Ltd. v. Kellogg Salada Canada Ltd.]
Consideration is an important part of a contract, in effect both parties must be giving and getting something of value (not necessarily money) to make it worthwhile to enter into the contract. The only case where consideration is not "something of value", is when the contract is sealed (the seal is seen as something of value). Seals may be the mechanical imprint of a corporation, or a small adhesive label, as is used to make an irrevocable offer a binding contract.
Gratuitous promise - a promise without consideration that generally wont be upheld by a court. An example is a verbal amendment to a written contract where there is no consideration. Note that this promise is moral not contractual.
"promissory or equitable estoppel" - In some cases when a contract is amended without consideration (a gratuitous promise), but one party would be inequitably punished by the strict enforcement of the contract, then the amendment may be accepted as valid. [Conwest Exploration Co. Ltd. et. al. v. Letain] [John Burrows Ltd. v. Subsurface Surveys Ltd. et. al.] [Owen Sound Public Library Board v. Mial Developments Ltd. et. al.]
Capacity to enter into contracts prevents those not capable of meeting the requirements from being held liable.
Minors do not have the capacity to contract, but if they contract, they can enforce the contract, the other party cannot hold the minor liable (unless it was for a necessity). The age of majority is 18 in most provinces, except in Nova Scotia, New Brunswick, Newfoundland, and British Columbia.
Drunks and lunatics (like minors) can enter into contracts for necessities, but for non-necessities the contract is unenforceable if the party was obviously incapacitated and repudiates the contract in reasonable time.
Corporations may not have the capacity to contract. This contract may be outside the corporate charter, not approved by the appropriate official. [Royal British Bank v. Turquand]
The purpose of a contract must not be illegal or contrary to statutes. Some examples of such contracts are,
- contracts that attempt to avoid loss of property in bankruptcy by transferring ownership (within one year to a relative or three months to a creditor).
- a contract provision to limit settlements already statute specified, such as The Workmans Compensation Act of Ontario
- when some form of license is required (e.g., P.Eng.) but not held. [Kocotis v. D'Angelo] [Calax Construction Inc. v. Lepofsky] In some cases this will only void part of the contract [Monticchio v. Torcema Construction Ltd. et. al.]
a contract that is against public/common law may also be voided. For example, non-competition clauses that could lead to monopoly type situations, or make an engineer unable to earn a living might not be enforced.
The statute of frauds has been developed to reduce problems resulting from fraudulent testimony. Generally, written contracts are required in certain circumstances such as,
unenforceable contracts will still be recognized to prevent inequities. For example, if a verbal sales contract is made and one party disputes the contract, it might be unenforceable, but they could force the returns of goods, money, etc.
Innocent misrepresentation involves a mistake that is not intentionally misleading, but results in another party entering into a contract. If the mislead party comes forward in time, the contract can be rescinded, and they can recover costs incurred. [Township of McKillop v. Pidgeon and Foley]
Fraudulent misrepresentation is similar to innocent misrepresentation, except an intent to deceive is involved, and the plaintiff can sue for deceit as well. [Derry v. Peek]
Mistakes in a contract can be overturned in rare cases.
Rectification can be done for a "common mistake" where an agreement had been reached but inaccurately recorded. If a clerical error has been made in a contract then the court may rectify it. An example of this is a figure of `$100 million' is accidently typed as `$100'.
Contract may be interpreted by the court using dictionary terms, witness accounts of the intentions, etc.
"parol evidence rule" - conditions that have been agreed upon verbally, but don't appear in a written contract cannot be entered as evidence. i.e., if it is not written it does not exist in the eyes of the court. This will only be overlooked when it can be seen that the condition was essential for the contract to be effective. [Pym v. Campbell]
Implied terms are terms that would obviously be expected to be in a contract, but have been overlooked. [The Moorcock] [Markland Associates Ltd. v. Lohnes] [Pigott Construction Co. Ltd. v. W.J. Crowe Ltd.] [G. Ford Homes Ltd. v. Draft Masonry (York) Co. Ltd.]
Discharge by performance - describes the end of a contract by satisfaction of the provisions of the contract.
Discharge by agreement - if both parties agree a contract can be terminated or amended.
Discharge by express terms - These can be written terms to end a contract
If a contract has been breached by one party, the other party may,
Repudiation - an obvious indication by one party (verbal or otherwise) that they do not intend to follow the terms of the contract. The other party may ignore the breach, treat it as breached and sue, or (in a reasonable time) notify the other party that they agree to discharge the contract. NOTE: in some cases repudiation may be warranted.
Remedies for breached contracts may include,
- quantum meruit - a reasonable measure of the value of work used when it was not stated in a contract or when determining damages. [Alkok v. Grymek]
- specific performance - an award where monetary rewards are not suitable (such as land transfer). This will not be given for anything requiring supervision, such as design work.
- injunction - a restraint to stop another party from an action. This will only apply to contract clauses that are also preventative in nature.
The compensation for damages are determined by the court [Hadley v. Baxendale]
Duty to Mitigate - when a party has been injured by a breach of contract they are obliged to minimize loses suffered. Failure to do this will reduce the damages awarded by the court.
Penalty Clause - a clause that must be a contractual remedy that avoids a breach. If a condition of the contract is not met it can be used to recover damages. These damages must be a reasonable estimate of the incurred loss, or else the court will not uphold the term.
Substantial compliance - when a contract has been fulfilled for the most part, except for some minor provisions of a contract, the court will award partial payment for work and services done. [Fairbanks Soap Co. Ltd. v. Sheppard]
Fundamental Breach - when a contract contains an exemption clause (e.g., a maximum liability) and it has been fundamentally breached, then the limitation clauses no longer apply. [Harbutt's Plasticine Ltd. v. Wayne Tank and Pump Co. Ltd.] [Photo Production Ltd. v. Securicor Transport Ltd.] [Murray v. Sperry Rand Corporation et. al.] [Beaufort Realties (1964) Inc. and Belcourt Construction (Ottawa) Limited and Chomedey Aluminum Co. Ltd.]
Mailbox Doctrine - When making an offer the medium of communication is usually set by the communication used for the offer. For example, if an offer is mailed, by Mr. A to Mrs. B. The offer is made on the date that A put the letter in the mail. If B accepted the offer, and returned it by mail, then the offer was accepted as soon as it was put in the mail. In other words the contract came into existence when B put the response in the mail. In most other cases the acceptance is only valid when received.
When an offer has been received, terms can be added or removed by the receiving party. As soon as the terms of the original offer have been modified the offer now becomes a counter offer. This is effectively a new offer, and must be approved by the original party.
VOID - means that a contract never existed
VOIDABLE - the contract has an option of being voided
In a retail store a price tag is an "invitation to treat", but it is not an offer.
undue influence - when a dominance leading to coercion exists such as an emotional bond between two family members that is exerted to enter a contract.
duress - unfair pressure or intimidation exerted to cause somebody to enter into an agreement can make the contract voidable [Mutual Finance Co. Ltd. v. John Wetton & Sons Ltd.]
misrepresentation - this can be either innocent or fraudulent.
Unilateral Mistake - when an honest mistake is made and it is fundamental. If the recipient of the offer knows that there has been a mistake. The court could be persuaded to fix such mistakes. For example, if Mrs. A is buying a new car for $20,000 plus $500 shipping, but she notices that the contract is for $500, and signs eagerly knowing there was a mistake. Later the autodealer realizes a mistake was made and asks the court to correct the unilateral mistake. Some examples of successful and unsuccessful cases are, [Imperial Glass Ltd. v. Consolidated Supplies Ltd.] [ Belle River Community Arena Inc. v. W.J.C. Kaufmann Co. et. al.] [Imperial Glass Ltd. v. Consolidates Supplies Ltd.] [Ron Engineering et. al. v. The Queen in right of Ontario et. al.] [Calgary v. Northern Construction Company Division of Morrison-Knudsen Company Inc. et. al.] The general principles are,
Discharge by Frustration - problems arise that could not have been anticipated before the contract was signed. These can allow the contract to be voided. For example a contract to provide phone service to a new facility could be discharged if war caused the city to be destroyed. [Metropolitan Water Board v. Dick Kerr and Company Limited] [Davis Construction Ltd. v. Fareham Urban District Council] [Swanson Construction Company Ltd. v. Government of Manitoba; Dominion Structural Steel Ltd., Third Party]
3.7.1.1 - Engineering Contracts
Engineers are often employed as agents, empowered to specific duties.
Engineers that fail to specify payments in contracts will be awarded quantum meruit in court.
When estimating costs in contracts the court may hold an engineer to a poor estimate. [Kidd v. Mississauga Hydro-Electric Commission et. al.]
There are a number of forms available that are a suitable basis for engineering contracts. These can be found in many engineering associations.
liability is normally limited in engineering contracts, this should be less than the liability insurance.
Engineers are expected to understand common law principles, as well as applicable laws for the industry of practice.
One example is the Hazardous Products Act.
Engineers are also expected to follow codes, standards and other applicable guides.
3.7.1.2 - Tort Liability and Contract Liability - Concurrently
We can consider the benefits of being sued for a contract, consider the case of a damage arising from a contract that is covered by a limitation period.
Normally a contractual obligation negates a tort [Schewebel v. Telekes] but it is possible for an engineer to be held liable for damages in both contract and tort law [Halvarson Inc. v. Robert McLellan & Co. et. al.] [Dominion Chain Co. Ltd. v. Eastern Construction Co. Ltd. et. al.] [City of Kamloops vs. Nielsen et. al.] Other cases go against this trend. [Sealand of the Pacific Ltd. v. R.C. McHaffie Ltd. et. al.]
A tort can generally be brought when it is outside of the duties described in the contract. [J. Nunes Diamonds Ltd. v. Electric Protection Co.]
3.7.1.3 - Construction Contracts
It is typical for an engineer and a contractor to have separate contracts with the owner. These duties expected of an engineer may be,
When hired as an agent/representative, an engineer must remain impartial and independent (there is a small conflict here) from the owner. [Brennan Paving Co. Ltd. v. Oshawa] [Kamlee Construction Ltd. v. Town of Oakville] [Croft Construction Co. v. Terminal Construction Company] [Sutcliffe v. Thackerah et. al.]. If this is not done, actions may not hold up in court. [Grant Smith & Co. v. The King]
Engineers (unless specifically excluded) are expected to inspect all major portions of construction. [Dabrous v. Zuliani et. al.]
An engineer should not direct (supervise) work methods of contractors unless specifically contracted to do so, or obvious problems exist. [Demers et. al. v. Dufresne Engineering et. al.]
An engineer working on a construction project should try to adhere to the contract, and keep a detailed journal of events, meetings, decisions, etc. These can be used later in court.
Detailed drawings and specifications are needed to minimize misunderstanding. Improperly prepared drawings and specifications could lead to liability. [Trident Construction Ltd. v. W.L. Wardrop and Accoc. et. al.]
The tendering process often involves "irrevocable offers" that are submitted. When one of these offers is accepted a contract typically exists between the successful bidder and the owner. Bid bonds are another way to ensure that a binding contract exists for the tendered bid. Note: this process should be directed by a lawyer.
Typical categories of construction contracts are,
- Stipulated-Price/Lump-Sum Contract - the basic bid amount will be paid on completion of the basic work. Additional work may be done, but this is at additional cost. This type of contract can be risky for the contractor (financial) and the owner (quality) if problems arise.
- Unit-Price Contract - in cases where the nature of work may change after starting the bids can be per unit of work (e.g., per cubic meter of soil).
- Cost Plus Percentage - When it is not possible to estimate the cost of construction before (e.g., rushing to start a high-rise) the contractor can be paid the expenditures plus some percentage. This contract does not encourage cost reduction.
- Cost Plus Lump-Sum Fee - The same as Cost Plus Percentage except there is no incentive to spend more.
- Cost Plus Lump-Sum Fee Plus Bonus - Like the Cost Plus Lump-Sum Fee except that a bonus is offered for savings below an estimated price. This encourages reduced spending.
- Guaranteed Maximum Price Plus Bonus - This is like a Cost Plus Lump-Sum Fee Plus Bonus Contract, except a guaranteed maximum cost is used instead of an estimated price.
- Design Build - a contractor will likely work on a cost plus bonus, and will supply the engineering services. This allows projects to proceed quickly, as there are no delays waiting for plans and specifications. In this contract the engineer typically has a contract with the contractor, not the owner. Project managers are often hired by the owner to manage the projects on their behalf for a fee.
It should be kept in mind that the contract between the owner and contractor should be consistent with the contracts between the contractor and subcontractor.
Delay and interference can cause suits and should be handled carefully.
Bonds are commonly used to ensure/secure bids, performance and labor and material payments. Here a third party bond agency indemnifies payment. If some contractual obligation is missed, the bond agency will pay, and pursue the party it has indemnified.
A letter of credit is often used in place of a bond. It is effectively a "blank cheque" for the holder.
3.7.1.4 - Liens
A construction lien directs an owner to hold back a percentage of the total cost for a period after completion (in Ontario it is 10% for 45 days). In this time anybody that is owed money for work, or materials on a property can place a lien on the property and prevent its sale. The holdback is used to pay them (even no there is no privity of contract between them).
If an owner does not follow the lien act, for example not keeping a holdback, the owner may then become liable for the subcontractors losses.
Before any holdback is released, or property is sold the local registry office must be checked for registered liens.
lien rights cannot be waived in contracts.
Trust funds can also be set up for fixed sum payments. These cannot be used until the subject of the trust has been paid.
Engineers can also make lien claims [Application of Erickson/Massey] [Englewood Plumbing & Gas Fitting Ltd. v. Northgate Development Ltd. et. al.] [Armbro Materials and Construction Ltd. v. 230056 Investments Limited et. al.]
3.7.2 EMPLOYMENT
Basically defined by the Employment Standards Act,
There are two basic types of employee status,
If employment ends there are four possible categories,
- wrongful dismissal - an employee is terminated for unjust reasons or without adequate notice. compensation or reinstatement may be sought in civil law.
- instructive dismissal - an employee is told to quit, or else be dismissed. compensation or reinstatement may be sought in civil law.
When dismissing an employee a minimum of two weeks notice is required. Generally, if the employee has worked for more than 4 months, then 1 months notice are required for each year worked.
Severance pay - Some employers will ask an employee to leave immediately, and not give notice. They are obliged to pay them the wages that they would have normally earned while working on notice.