36.6 PRACTICE PROBLEMS
1. On a ferris wheel we have a 3.5" running journal that is to be pressure lubricated. The fit selected for this application is RC4. Use a tolerance diagram to determine the tolerances required on a final drawing. Sketch the hole, and shaft using appropriate drafting techniques.
2. Do complete drawings for a 3.000" hole shaft pair if they have a RC3 fit.
37. Clearance fits are found in,
b) interchangeable assembly.
38. Which statement is more true?
a) production errors cause tolerances.
b) there are no standard tolerances.
c) both a) and b) are completely true.
d) neither a) or b) is true.
39. Given the diagram below, what will the average interference/clearance be?
40. Briefly describe the relationship between tolerance and accuracy. (2%)
41. A hole shaft pair uses a bushing. We know that the fit between the shaft and bushing is LC5, with a nominal diameter of 7" and the fit between the bushing and outer hole is 8" with an FN3 fit. (8%)
a) Draw the tolerance diagrams.
b) Draw the final parts with dimensions and tolerances.
c) What will the gap between the shaft and the bushing be?
