Ayres, R. U., W. Haywood, M.E.Merchant, J.Ranta, and H.-J.Warnecke, editors of Computer Integrated Manufacturing, Volumes 2 & 3, Chapman & Hall, 1990.
Bedworth, David, D.,Henderson, M. R., and Wolfe, P. M., Computer-Integrated Design and Manufacturing, McGraw-Hill Inc., 1991.
Black, Uyless, Physical Level Interfaces and Protocols, IEEE Computer Society Press, 1988.
Bollinger, John, G. and , Neil A. Duffie, Computer Control of Machines and Processes, Addison Wesley, 1988.
Carter, Donald, E., Baker, B. S., CE Concurrent Engineering; The Product Development Environment for the 1990s, Addison-Wesley Inc., 1992.
Drozda, Thomas J., editor of Flexible Manufacturing Systems, Society of Manufacturing Engineers, 1988.
Dym, Clive, L., and Levitt, R.E., Knowledge-Based Systems in Engineering, McGraw Hill Inc., 1991.
Foston, Arthur L. and Carolena L. Smith, Tony Au, Fundamentals of Computer-Integrated Manufacturing, Prentice Hall, 1991.
Groover, Mikell, P., Automation Production Systems, and Computer-Aided Manufacturing, Prentice-Hall, 1980.
Groover, M.P., Zimmers, E.W., CAD/CAM; Computer-Aided Design and Manufacturing, Prentice Hall Inc., 1984.
Harrington, Steve, Computer Graphics; A Programming Approach, McGraw Hill Publishers, 1983.
Hoffmann, Christoph M. , Geometric & Solid Modelling, Morgan Kaufmann Publishers Ltd., 1989.
Holt, D.R., Integrated Manufacturing Engineering Systems, McGraw-Hill Inc., 1992.
Jha, Nand, K., editor of Handbook of Flexible Manufacturing Systems, Academic Press, 1991.
Jones, Albert, Edward Barkmeyer, “Toward a Global Architecture for Computer Integrated Manufacturing”, Proceedings of CIMCON ‘90, pp. 1-20.
Jones, Peter, F., CAD/CAM: Features, Applications and Management, MacMillan Press Ltd., 1992.
Joshi, S., and , R. Wysk, “A Scaleable Architecture for CIM Shop Floor Control”, Proceedings of CIMCON ‘90, pp. 21-34.
Kaminski, Michael A. Jr., “Protocols for communicating in the factory”, IEEE Spectrum, April, 1986, pp.56-62.
Kochan, Anna, and Cowan, D., Implementing CIM: Computer Integrated Manufacturing, IFS Ltd. & Springer-Verlag, 1986.
Lawry, Mark, H., I-DEAS Student Guide, Structural Dynamics Research Corporation, 1991.
Lee, Douglas, Private correspondence, 1992.
Miller, Richard K. , Terri C. Walker, FMS/CIM Systems Integration Handbook, The Fairmont Press, Prentice Hall, 1990.
Mitchell, F. H., Jr., CIM Systems: An Introduction to Computer Integrated Manufacturing, Prentice-Hall, 1991.
Preston, E.J., Crawford, G.W., Coticchia, M.E., CAD/CAM Systems;Justification, Implementation, Productivity Measurement, Marcel Dekker Inc., 1984.
Ralston, Anthony, and Reilly, E.D., Encyclopedia of Computer Science, third edition, IEEE Press, 1993.
Shorter, D. N., “Progress Towards Standards for CIM Architectural Frameworks”, Proceedings of CIMCON ‘90, pp. 216-231.
Smith, B, and J. Wellington, “Initial Graphics Exchange Specification (IGES) Version 3.0 (SP-686)”, The Society of Automotive Engineers, Warrendale, Pennsylvania, USA, April 1986.
Spur, H. C. G., Kai Mertins, Wolfram Sussenguth, “Integrated Information Modelling for CIM”, Proceedings of CIMCON ‘90, pp. 373-389.
Thacker, Robert, M., A New CIM Model; A blueprint for the computer-integrated manufacturing enterprise, Society of Manufacturing Engineers, 1989.
Tong, Christopher, and Sriram D., Artificial Intelligence in Engineering Design, Volume 3, Academic Press Inc., 1992.
Van Haren, Clyde R. , Theodore J. Williams, “A Reference Model for Computer Integrated Manufacturing from the View Point of Industrial Automation”, Proceedings of CIMCON ‘90, pp. 42-62.
Walley, Brian. H., How to Turn Round a Manufacturing Company, Ellis Horwood Ltd, England, 1992.
Zeid, I., CAD/CAM Theory and Practice, McGraw-Hill Inc., 1991.