##
1.7 PRACTICE PROBLEMS

1. a) Develop a motion profile for a joint that moves from -100 degrees to 100 degrees with a maximum velocity of 20 deg/s and a maximum acceleration of 100deg/s/s. b) Develop a setpoint table that has values for positions every 0.5 seconds for the entire motion.

2. Consider a basic servo controller with encoder feedback. The motor will start at a position count of 100, and end the motion at a count of 3000. The motion is to have a maximum acceleration of 300 counts/s/s, and a maximum velocity of 100 counts/s. Find a motion profile that satisfies these constraints. Generate a table of setpoints for the desired position every 2 seconds.